Name: Pump-it® canister pump
SKU: 5201-1000

View in the flip catalogue

To all specifications

Packaging unit

Piece

Please note

Not suitable for crystallising substances!

Pay attention to the chemical resistance of the materials! See also List of chemical resistance

Detailed information

The Pump-it^® canister pump is ideal for the regular withdrawal of small quantities of liquid from canisters and similar containers up to approx. 60 litres. Safe filling and emptying of canisters, carboys and small drums is also quick and easy.

The acid-proof barrel pump seals the container airtight, so the pump can remain on the container and is quickly available for filling at any time.

Repeated actuation of the manual piston creates an overpressure in the container. By opening the stopcock, the liquid is discharged from the pump. When the stopcock is released, the pulsation-free jet of liquid stops immediately without any run-on. This allows precise dosing. Filling can be resumed immediately by reopening the stopcock without any further pressure build-up.

The delivery tube is continuously adjustable from 550 to 1000 mm for complete emptying of the container, and can be shortened for smaller containers.

The lightweight and compact canister pump is suitable for weak acids, alkalis and petrochemicals.

Typical application area of the product

The Pump-it^® canister pump is used wherever small quantities of acids, alkalis or petrochemical liquids need to be filled or decanted on a daily basis, e.g. in laboratories, pharmacies, in the chemical sector or in industry.

How to use the product

Insert telescopic delivery tube into the canister pump and fully extend.
Screw the canister pump onto the container thread (Ø 64 mm), if necessary use a suitable thread adapter (see accessories).
Operate the hand piston and build up pressure.
To fill, open the discharge valve (press the lever down) and fill the liquid.
Release the lever to stop filling.

5201-1000_zer12_v02_en_ex.pdf

5201-1000_pump-it_gebrauchsanleitung.pdf

Pump-it® canister pump

Specifications

General material

PP
Polypropylene

General material

PE
Polyethylene

Further materials

FKM, FPM
Fluorine rubber

Delivery tube

Immersion depth max.:: 100 cm
Immersion depth from:: 54 cm
Immersion depth up to:: 100 cm

Throughput

Conveying capacity:: 8 l/min

Connection

Connection type:: Fassverschraubung
Thread:: Thread
Version:: Aussengewinde

Ø

Immersion tube Ø:: 19 mm

Pump outlet

Outlet type:: Auslaufbogen
Length of discharge tube:: 162 mm
Outer outlet Ø:: 19 mm

Colouring

Colour:: weiss

Limit values

Viscosity up to:: 500 mPa·s

To the list of chemical resistance

Complementary products

Adapter set Pump-it®

Thread adapter set for Pump-it® canister pump consisting of:

Adapter PP outer-outer, S 70x6 (Mauser) - S 64x5, green
Adapter PP outer-outer, S 56x4 (Tri-Sure) - S 64x5, brown
Adapter PP outer/outer, G 2" - S 64x5, blue
Adapter PP outer-inner, S 64x5 - S 60x6 (DIN60), black
Adapter PP outer-inner, S 64x5 - S 55x5 (DIN51), black

Thread adapters PP

We offer a broad range of thread adapters. This facilitates the secure connection of many of our pumps and discharge cocks to a variety of containers. You will always find the correct connection thanks to the combination of different adapters. Do you have any questions about choosing the right thread adapter? Please call us. We are glad to offer assistance.