Packaging unit

Piece

Detailed information

With the Novartos Uno 2-sampler, a double target point sample can be taken from a predefined sampling area. A collection chamber is equipped with two sample inserts (accessories) for the double sampling train.

Novartos pharmaceutical samplers can be used to take multiple unit-dose samples from one or more sampling points in a single sampling run.

Thanks to the intelligent design of these pharmaceutical samplers, it is not necessary to pierce the sample material several times for a multiple sample, thus largely avoiding segregation of the sample material. This is a particularly important requirement when taking very small quantities in the pharmaceutical industry.

With the Novartos sampler, a large number of samples can be taken quickly and easily, even from the same location, allowing representative retained samples to be taken.

The immersion depth of the sample lance is easy to read off the laser engraved depth scale. The rounded tip prevents scratching of the container. Two additional handles ensure safe insertion, fixation and rotation in the material. The precisely fitting inserts prevent mixing of materials and allow easy disassembly for thorough cleaning.

The electro-polished, grooveless surface of the pharmaceutical sampler and the high quality finish mean that there are no gaps for sample residue to collect in, which is also a key benefit for easy cleaning.

Typical application area of the product

The Novartos pharma sampler is a highly specialised sampler used primarily in the pharmaceutical industry to meet the strict requirements of FDA guidelines for unit dose sampling. However, the application is not limited to the pharmaceutical sector, but can also be used in the chemical industry, food and beverage industry, biotechnology, wherever the smallest quantities of powders need to be sampled in a representative way.

How to use the product
  1. With "1", move the sampler to the "CLOSE" position. The sampler is closed and can be inserted into the powder/granulate.
  2. Insert the sampler into the powder/granulate to the desired depth (the scale indicates the depth in cm).
  3. Move the sampler to the "OPEN" position at "1". The sampler is now open and is filled with sample.
  4. Move the sampler at "1" to the "CLOSE" position. The sampler is closed and the powder/granulate can be removed.
  5. If a second sample is to be taken, move the sampler at "2" to the "CLOSE" position.
  6. Move the sampler at "2" to the "OPEN" position. The sampler is open and is filled with the second sample.
  7. Move the sampler at "2" to the "CLOSE" position. The sampler is closed and the powder/granulate can be removed.
  8. Open the sampler and empty the sample onto an appropriately prepared surface or into a suitable collecting container.

  • Sampling lance Novartos Uno 2-compartment sampler

Specifications

General material

1.4404 (316L)
Stainless steel 1.4404, AISI 316L

General material

1.4571
Stainless steel 1.4571, AISI 316Ti

Sample chamber details

Number of collection openings:
1 Stk.

Collecting chamber dimensions

Chamber length:
45 mm
Start of the collecting chamber:
52.5 mm
Chamber width:
13 mm

Lance dimensions

Pipe Ø:
25 mm
Outer Ø:
25 mm
Plunge depth:
600 mm
Total length:
800 mm
To the list of chemical resistance

You need

The following accessories are required to use the product

You need

Novartos Uno sample inserts

Novartos Uno sample inserts are accurately fitting, easily interchangeable sample inserts for the Novartos Uno pharmaceutical sampler. Different volumes can be selected and combined. The blind insert (0.0 ml) can be used to prevent sampling at a specific point.
Necessary accessories