Packaging unit

Piece

Please note

Caution! When handling flammable, highly flammable liquids, the explosion protection guidelines must be observed. All parts must be earthed, use anti-static set!

The pump is not suitable for acetone or similar drying solvents.

Detailed information

This stainless steel barrel pump has a fixed discharge elbow for accurate and safe filling of liquids. The robust stainless steel discharge elbow directs the liquid in a targeted and controlled manner, preventing spillage and splashing.

For use in demanding environments, the stainless steel barrel pump with discharge elbow is extra durable and easy to clean.

Stainless steel drum pumps are powerful and versatile piston pumps for transferring flammable or aggressive liquids and chemicals.

Their electrical conductivity makes the drum pumps ideal for highly flammable or combustible liquids. They have been specially developed for use in zones 0 and 1 (explosion groups II A and II B) and are DEKRA-tested. When used for flammable media, the pumps must be grounded.

The PTFE seals not only guarantee high chemical resistance, but also excellent sliding properties during the pumping process.

Stainless steel drum pumps are very flexible and versatile. They are ideally suited for a wide variety of drums, containers or other receptacles (approx. 60 to 1000 l capacity, up to 91 cm depth) and are thus true all-rounders in the workshop or production.

Compared to conventional solvent pumps for highly flammable liquids, our stainless steel drum pumps offer excellent value for money.

The durable and robust drum pumps made of high-quality, corrosion-resistant stainless steel (1.4301) guarantee a long service life, especially in humid or aggressive environments.

Typical application area of the product

Stainless steel drum pumps are electrically conductive and resistant to a wide range of chemicals, enabling safe and efficient transfer or metering of liquids in the chemical, pharmaceutical or food industries.

How to use the product

Screw on the discharge elbow.
Insert the barrel pump with barrel screw fitting (accessory) into the barrel and screw in hand-tight.
If necessary, adjust the height of the riser tube.
Place the filling container under the discharge bend.
Pull the cap off the discharge bend.
Operate the piston rod with the handle and fill the liquid.
During the last pump stroke, push the piston rod into the pump as far as it will go.
Carefully unscrew the pump from the barrel.
Rinse the barrel pump with pH-neutral liquid.

5601-0x00_fasspumpe_edelstahl_auslaufbogen_gebrauchsanleitung.pdf

Stainless steel barrel pump
Discharge elbow

Specifications

General material

1.4301 (AISI 304)
Stainless steel (1.4301), AISI 304

Further materials

PTFE
Polytetrafluoroethylene

Pump outlet

Outer outlet Ø:: 12 mm
Length of discharge tube:: 290 mm
Outlet type:: Discharge tube

Connection

For openings from:: 32 mm
Connection type:: Barrel screw joint

Throughput

Delivery rate min.:: 9 l/min
Max. delivery rate:: 22 l/min
Conveying capacity:: 190 ml/stroke

Limit values

Viscosity up to:: 500 mPa·s

Ø

Immersion tube Ø:: 32 mm

Colouring

Colour:: silver

Delivery tube

Immersion depth max.:: 36 cm

To the list of chemical resistance

You need

The following accessories are required to use the product

You need

Anti-static set

Necessary accessories

Complementary products

Brass barrel screw joint

Barrel screw joint made of nickel-plated brass for barrel pump stainless steel. Prevents electro-static charge in combination with the Anti-static set. For the safe transfer of flammable and easily flammable liquids. For containers with R 2" steel fine thread inside.

The container connectors make decanting even easier and safer with their more secure connection to barrels.

Gastight barrel connector

The gas tight barrel screw joint prevents hazardous gases from escaping from the barrel. G2" steel barrel thread, non-return valve with connection 1/8". Nickel-plated brass, seals made of FKM.

The container connectors make decanting even easier and safer with their more secure connection to barrels.

Discharge hose 1.2 m with stopcock

Discharge tube, single, thread G 3/4"

Fixed discharge tube for barrel pumps with G 3/4" connection thread, e.g. for AccuOne / EnergyOne barrel pumps.

Universal thread adapter

Universal thread adapter for nearly all drums and other containers with opening of 48–75 mm in diameter, regardless of the respective thread. The thread adapter can be mounted quickly and easily with clamping screws and can be used for different container openings.

With G2" connector thread for Bürkle drum screw connections and pumps with immersion tube diameter up to 32 mm.

Similar products

Stainless steel barrel pump - discharge hose & valve

Stainless steel barrel pump with flexible discharge hose for maximum filling flexibility. Its conductivity makes it ideal for flammable liquids (DEKRA approved for Zone 0, 1, IIA, IIB). It offers high flexibility and good value for money.

Solvent pump hand operated, for tin-foil canisters

The solvent pump for tinplate canisters with pull-out spout puts an end to the risky decanting of dangerous substances into another container. The included thread adapter fits to the standard pull-out spouts - immediate safety!